ACSOON Power Inverter

ACSOON Power Inverter

A power inverter changes DC power from a battery into conventional AC power that you can use to operate all kinds of devices ... electric equipment applications. You just connect the inverter to a battery, and connect your AC devices equipment into the inverter ... and you've got pure sine wave power from the Inverter. 

Acsoon® ANDW series power inverter, provides clean low-distortion sine wave
output at ideal powering sensitive electronics/instruments,electric equipments. It integrates IGBT made by combines microprocessor and PLC control design together for quick response and higher reliability. The input could be grid power AC 220Vac +/-15% single phase, 380Vac+/-15% three phase and battery DC 48V,60V,110V,220V or 520V etc.,For instance,when AC input power supply failed, the Inverter will automatically switch to your DC source. Of course, when DC input power supply failed , the unit will switch to BYPASS AC Input. It can be factory set for AC or DC primary input operation mode.

The inverter draws its power from a battery, or several batteries wired in parallel. The battery will need to be recharged as the power is drawn out of it by the inverter. The battery can be recharged by running the automobile motor, or a gas generator, solar panels, or wind. Or you can use a battery charger plugged into an AC outlet to recharge the battery.

Whatever a power converter or inverter is, customer should clearly understand what the electric device or equipment’s capacity is. For example, the electric device’s Horse Power is 3kW, we usually propose customer with a wide rage of converter or inverter such as 5kVA,  ACSOON provide wide range of capacity to customers for their electric devices.

Acsoon® ANDW series power supply single units are available with the
following capacities:
Single phase output: 500VA ~ 10KVA
Triple phase output: 500VA ~ 100KVA

Block diagram of the ANDW Series IGBT pulse width modulation DC
to AC power source



Image references of ACSOON Power Inverter