Model Series | ADCW01 |
Input | Single Phase or Three Phase + N +PE |
220Vac (L-N)±10%;380Vac(L-L)±10%, or as per customized
|
|
Frequency: 50Hz/60Hz
|
|
Output
|
Voltage : 0- Nominal Voltage adjustable
Volt. DC 12V, 15V,24V,30V,50V,60V100V,150V,300V,600V or as per customized
|
Current: 0- Nominal Current adjustable,With current limiting control
Ampere:1A,2A,3A,5A,6A,10A,12A,20A,40A,50A,60A,75A,80A,90A,100A,150A,250A,300A,500A,1000A...or as per customized
|
|
Voltage Stabilization
|
Source effect ≤0.5% Nominal(The change rate of output voltage is caused by ± 10% change of input voltage)
|
Load effect ≤0.5% Nominal(Output voltage change rate caused by load change from 10% - 90%)
|
|
Time drift:≤0.5% Nominal (Change rate of output voltage caused by continuousworking time more than 8 hours)
|
|
Temperature drift ≤0.5Nominal/℃(In the power supply temperature range, the output voltage change rate caused by the ambient temperature)
|
|
Current Stabilization
|
Source effect ≤0.5% Nominal ( Output voltage change rate caused by input voltage change in the range of + 10% - 90%)
|
Load effect ≤0.5% Nominal(The output voltage varies from 90% to 10% when the load rate changes)
|
|
Time drift ≤1% Nominal ( Change rate of output voltage caused by continuous working time more than 8 hours)
|
|
Temperature drift ≤1% Nominal/℃(in the power supply temperature range, the output voltage change rate caused by the ambient temperature)
|
|
Ripple(rms)
|
RMS≤0.5% Nominal Value
|
Power control mode
|
Potentiometer switch knobs, Adjusts the resolution by one byte
|
Control Interface
|
Modbus Protocal RS232 (RS485), setup volt.current value.on/off though PC control
|
Displaying accuracy
|
Voltage meter: Four and a half VFD,Resolution>0.1V
|
Current meter Four and a half VFD,Resolution>0.1A
|
|
Protection
|
Input phase loss, Output over voltage,over load current limiting, short circuit and over temperature
|
Cooling mode
|
Air forced fan
|
IP Protection
|
IP20 (Could be customized as per buyer’s require)
|
Color
|
RAL7035
|
Working Temp.
|
-10℃ to 45℃
|
Standard
|
EN61000-6-3 & EN60204-1
|